Roller Shutter maintenance

Some Common Problems in Roller Shutters and How to Fix Them

The security system of any kind in a business plays an important role in its sustainability such as Roller Shutters. Their long-lasting requirements are what make them most valuable as your company’s asset. They act as the backbone of your company. Roller Shutter Doors are a great way to make your premises more secure. They can also be represented as an attractive exterior of any building. 

 

While all roller shutters are as reliable as they come, all of them face some problems from time to time. They often experience problems as time passes and need repairs. For example, Commercial roller shutter doors are manufactured and installed with the greatest security in mind. Various businesses use them for protection against theft. As per the legal regulations, no building should be without them.

Problems do occur in other Roller shutter doors as well such as Industrial Roller Shutter Doors, and Domestic Shutter Doors. That being said, these same doors that are used for protection can become a liability when they aren’t professionally installed and maintained. 

 

This leads to workers getting seriously injured if the shutter door falls shut on them without proper support or security measures taken by employers in place first. Hence, it is immensely paramount to ensure that your roller shutters are working correctly. 

 

So, are your roller shutters letting you down? If yes, then this blog will focus on some of the most common problems associated with roller shutters and how you can fix them. 

Common Problems in Shutter Door

1. Shutters gets stucked

A frequent problem with roller shutters is that they often get stuck. In other words, they do not open or get shut easily. If this happens then your shutter is experiencing a big issue when you need quick access to your outside property. 

So, how can you fix this? Well, many different things could be causing the shutter to get stuck. The first thing to check for this problem is whether the power source has been turned on. Check if there are any lights near it, and then switch off and back on again. If the shutter still does not budge after applying these steps, then we recommend other solutions:

  • If there is an obstruction in between the two sides of your roller then cleaning and lubricating out all of your components with some solvent can help ensure a smooth motion. 

  • If this also does not work, then you may have a defective part that needs proper replacement.

2. Overheating Problems

If your electric roller shutters are not working properly but the power source is turned on as explained above, then you could encounter a list of potential issues here.

For example, if there is frequent use of the roller shutter in a short space of time, then you might find that the motor has overheated. Therefore, the solution to this problem is to leave your roller shutter for a while and give it time to cool down. Then after some time, you can try again and it will work. So, with persistent use, the shutters can become hot over time, which may cause them to malfunction. 

However, if you suspect that this can be the case for your roller shutter problems, then you must know how they work and take steps accordingly to ensure their longevity.

3. Shutters are sticking

If your shutters are not opening or closing smoothly and it is getting stickier or jammed, then lubricating them with WD40 spray may be the best solution to operate jammed shutters. It is also termed water displacement #40. 
Lining the rails with this product can not only stop any unpleasant sounds but also reduces screeching noises as well.

4. Shutters only shutting halfway

If your automated roller shutters are not closing fully and they are getting stopped halfway, then it could be because of dirt deposited on one or more proximity sensors or they might have been pushed out of an alignment. 

For this, you should first clean any dust or debris that is deposited on them and even mold from these detectors to make sure they are in a good condition. Then check if your roller shutters are structurally damaged or are not aligned properly which needs a priority fixation or replacing them entirely.

5. Shutter condition

If you see any dents or cracks in your shutters, this may be a sign that it’s time to get new ones. Commercial or industrial settings can cause minor issues with the door’s overall functionality. 

For example, unfortunately, if your roller shutters are in a factory or any industrial setting then dents and dings will be common where vehicle traffic is high. If these dented shutters are not properly taken care of quickly, larger cracks may appear. Therefore, such issues should be assessed by professionals as soon as possible.

 

Roller shutters play an important role in maintaining the security of the premises. It can be a real aid to your business for the foreseeable future. So, if your roller shutters are also experiencing such difficulties, feel free to contact Altus Shop front and shutter repair.

Reach us for the Free Quote of your StoreFront